Going on a trip with a drone is always exciting. You can already imagine the aerial shots of the landscapes, the immersive videos, the incredible memories to bring back… But before putting your drone in your bag, there are a few essential points to check.
With the Antigravity A1 , the experience is even more interesting, because it’s not just a typical drone. It’s a 360 drone, designed to create immersive images, crop the footage after the flight, and provide a true sense of exploration with the Vision goggles. But precisely because it’s a complete setup with drone, batteries, goggles, and controller, you need to plan your trip carefully.
Here is the complete checklist for traveling with peace of mind with the Antigravity A1.
Why travel with the Antigravity A1?
The Antigravity A1 is particularly interesting for travel because it allows you to capture an entire scene in 360°. Unlike a classic drone where you have to get the framing right during the flight, here you can fly first, then choose your angle later during editing.
This is very practical for content creators. A single flight can allow you to create a 16:9 YouTube video, a 9:16 Instagram Reel, a Short, a story, or even several different angles of the same scene.
When traveling, this is a huge advantage. You don’t always have time to do multiple flights. The weather can change, the light can disappear, the battery can run low, or the location can become too crowded. With a 360 drone, you maximize your chances of capturing usable footage.
The other major advantage is the immersion. With the Vision glasses, you’re not just watching a camera feed on a screen: you truly feel like you’re in the scene. Exploring a mountain, a beach, a road, or a spectacular landscape is a very different experience from using a traditional drone.
Before traveling: check drone regulations
Before you even pack your bag, the first thing to do is to check the drone regulations of the country you are going to.
Each destination has its own rules. Some countries readily allow drones, while others require registration, authorization, insurance, or completely prohibit flying in certain areas. National parks, cities, beaches, military zones, and airport perimeters may also be subject to specific restrictions.
The best course of action is therefore to check local regulations before departure. In the Antigravity app, you can view flight information by going to:
Antigravity App> Flight Preparation> Flight Policy> Select the country or region concerned.
This is an important step, especially if you’re going abroad. An area that seems perfect for flying might actually be a no-fly zone. And if you’re stopped by the police, not knowing the rules won’t protect you.
Traveling by plane with the Antigravity A1
If you’re flying, the question of transport is crucial. Rules can vary between airlines and countries, but there’s a general rule to remember: lithium batteries usually have to travel in the cabin.
For the Antigravity A1, it is therefore recommended to keep the batteries, Vision goggles, Grip Controller, and other important accessories with you. The drone body can sometimes be placed in the hold depending on the airline’s rules, but ideally, it is best to keep all sensitive equipment in the cabin.
For what ? Simply to avoid bumps, losses, theft, or unpleasant surprises upon arrival. Your drone is a fragile and valuable piece of equipment. Being able to carry it with you in a suitable bag makes it much more reassuring.
Before departure, always check your airline’s conditions regarding batteries, their permitted capacity and how to transport them.
Prepare your drone bag before departure
Before you leave, make a proper checklist of your equipment. There’s nothing worse than arriving at your destination and realizing you’re missing a microSD card, a cable, or a spare propeller.
In your bag, remember to pack:
- the Antigravity A1;
- Vision glasses;
- the Grip Motion Controller;
- the batteries;
- the charging hub;
- the charger;
- the necessary cables;
- one or more fast microSD cards;
- spare propellers;
- a microfiber cloth;
- the lens replacement kit;
- the take-off mat;
- An external battery if needed.
Before you leave, remember to update your firmware. It’s much easier to do this at home, with a good internet connection, rather than in a hotel with unreliable Wi-Fi.
Checklist before each flight during the trip
Once you arrive, don’t take off too quickly. Even if the scenery is magnificent, take a few minutes to check your equipment and your surroundings.
First, check that everything is charged: the drone, the Vision goggles, the controller, and the batteries. Also check that the battery is properly inserted, that the propellers are not cracked, that the sensors are clean, and that the microSD card is correctly installed.
Next, choose a suitable take-off area. Ideally, it should be a flat, open, and unobstructed surface. Avoid taking off near water, under trees, next to power lines, near a building, or in the middle of a crowd.
Place the drone on a stable surface, with the rear of the drone facing you. This detail may seem simple, but it helps to maintain a good starting point, especially if you are a beginner or flying in an unfamiliar location.
Properly configure the Return to Home
Return to Home, or RTH, is one of the most important settings when traveling. When you fly in an unfamiliar place, you absolutely must plan the drone’s return before even taking off.
In Vision glasses, you can access the safety and return settings via:
Glasses menu> Safety Settings> Return Settings> Return Path.
Depending on the available options, you can choose an optimized return or a return to a defined altitude. In all cases, the return altitude must be high enough to avoid surrounding obstacles: trees, buildings, terrain, pylons, or cliffs.
A common mistake is setting the altitude too low. When traveling, it’s best to maintain a safety margin. If you’re in an area with trees or buildings, set an altitude significantly higher than the tallest obstacle around you.
What to do in case of an emergency?
Even with good preparation, an incident can happen. If the drone crashes, the first thing to do is secure the area. Never put yourself in danger to recover a drone.
If you can retrieve it safely, take photos of the situation, inspect the drone, propellers, batteries, and lenses. Do not take off again immediately if you notice any impact, crack, damaged battery, or abnormal behavior.
If your drone is lost in flight, use the available location features, retrieve flight information if possible, and contact official support. If you have subscribed to Antigravity Care, this can also help you in case of an accident, loss, or damage.
After the flight: inspection and backup
After each flight, make it a habit to quickly inspect your equipment. Check the lenses, sensors, propellers, drone arms, and batteries. If you flew in a humid, dusty, or salty environment, gently clean the drone before storing it.
The other essential point is backing up your files. When traveling, don’t wait until the end of your trip to transfer everything. Regularly back up your videos to a computer, hard drive, or the cloud if you have a good internet connection.
360 files can take up a lot of space. So also check the available space on your microSD cards to avoid running out of storage at the wrong time.
Should you travel with the Antigravity A1?
Yes, absolutely, if you want to create immersive content and come back with footage that’s different from what you’d get with a regular drone, the Antigravity A1 is particularly well-suited for travelers, content creators, solo videographers, and anyone passionate about original images.
But it needs serious preparation. Traveling with a drone requires checking regulations, respecting transport rules, preparing equipment, configuring RTH, and regularly backing up files.
If you want to discover the drone, you can use the promo code AGRRLOV , which allows you to take advantage of the bonus lens replacement kit + take-off mat offered , depending on the current offer.
Discover the Antigravity A1
See the offer with the code AGRRLOV
Conclusion
Traveling with the Antigravity A1 can truly transform the way you film. Thanks to 360 video, Vision glasses, and post-flight cropping, you can capture much more immersive memories and create multiple pieces of content from a single sequence.
But to take full advantage of it, you need to plan ahead: regulations, transporting batteries, pre-flight checklist, safety settings, Return to Home and file backup.
When properly prepared, the Antigravity A1 becomes an excellent travel companion for creating original, immersive images that are easy to adapt to YouTube, Instagram, TikTok or Shorts.
Leave a Reply